Telephony Parameters - Polycom SoundStructure C16 Design Manual

set matrix_pan "Phone In"
"Amplifier" -1
set matrix_pan "Phone In"
"Amplifier" 0
set matrix_pan "Table Mic
1" "HDX Stereo Mics Out"
-1

Telephony Parameters

val matrix_pan "Phone In"
"Amplifier" -1.000
val matrix_pan "Phone In"
"Amplifier" 0.000
val matrix_pan "Table Mic
1" "HDX Stereo Mics Out"
-1.000
Telephony Parameter Summary
Some telephony API commands operate on the input virtual channel and
some operate on the output virtual channel. Below is a table of commands and
whether they operate on the input or output channel.
Command
phone_auto_answer_en
phone_connect
phone_dial
phone_dial_tone_gain
phone_dtmf_gain
phone_entry_tone_en
phone_exit_tone_en
phone_flash
phone_flash_delay
phone_redial
phone_ring
phone_ring_tone_en
phone_tone_gain
Sends the mono virtual channel "Phone In" to only the left
channel of the stereo virtual channel "Amplifier".
Sends the mono virtual channel "Phone In" to both the
left and right channels of the stereo virtual channel
"Amplifier".
Sends the mono virtual channel "Table Mic 1" to the left
channel of the stereo virtual channel "HDX Stereo Mics
Out".
Input channel
✔
✔
✔
✔
✔
✔
✔
✔
Command Protocol Reference Guide
Output channel
✔
✔
✔
✔
✔
A - 43