Upgrading Software With The Web Configuration Utility - Polycom SoundStructure C16 Design Manual

Upgrading Software with the Web Configuration Utility

The Web Configuration Utility provides a convenient way to manage and
upgrade the software in your SoundStructure VoIP Interface through a local
FTP server or local HTTP server.
To run either an FTP or HTTP server on your local PC, you will have to temporarily
turn off or open the appropriate ports on your Windows Firewall. If you do not allow
traffic through your Windows Firewall, or make exceptions to allow the FTP or
HTTP traffic, your SoundStructure VoIP Interface will not be able to reach your PC's
FTP or HTTP server and you will not be able to update the software on your
SoundStructure VoIP Interface. After the software has been updated, you can turn
your firewall back on or close any ports you opened.
Downloading and Installing an HTTP Web Server
A free and popular Web server, Apache Server, is available for 32-bit Windows
at http://httpd.apache.org/download.cgi#apache22
been tested with the Polycom UC Software. To set up the Web server:
1. Download and install the latest version of Apache Server from
http://httpd.apache.org/download.cgi#apache22.
2. After installation test that the web server works by opening your browser
and entering in the IP address of your PC. If successful you should see a
page with the text "It works".
3. Edit the httpd.conf file that by default will be installed in the c:\Program
Files\Apache Software Foundation\Apache2.2\conf directory and set
the DocumentRoot entry to point to the directory where you would like
to have the software files, for example enter c:/http/files for the Windows
directory of c:\http\files.
Using a Web Server with Web Configuration Utility Software Upgrade
To use the Web Configuration Utility Software Upgrade feature, follow these
steps:
The SoundStructure VoIP Interface
and version 2.2.19 has
12 - 55