Polycom SoundStructure C16 Design Manual page 244

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
HDX Remote Vol Down Held
HDX Remote Vol Down Press
HDX Remote Vol Up Held
HDX Remote Vol Up Press
HDX Remote Phone 0
HDX Remote Phone 1
HDX Remote Phone 2
HDX Remote Phone 3
HDX Remote Phone 4
HDX Remote Phone 5
HDX Remote Phone 6
HDX Remote Phone 7
HDX Remote Phone 8
HDX Remote Phone 9
HDX Remote Phone *
HDX Remote Phone #
HDX Remote Phone Disconnect Hangs up the phone
HDX Remote Phone Connect
9 - 14
As an example, consider the event for the adjusting the volume of the system.
In this example, the trigger equals 59 which is the value of the volume up key
on the remote. When key 59 is pressed, the fader for the amplifier will be incre-
mented by 1dB.
The full list of events created when and HDX IR Remote is added to a project
is shown in the following table.
Event Name Description
Decrements the fader for "Amplifier" by 1dB
Decrements the fader for "Amplifier" by 1dB
Increments the fader for "Amplifier" by 1dB
Increments the fader for "Amplifier" by 1dB
Dials the digit "0"
Dials the digit "1"
Dials the digit "2"
Dials the digit "3"
Dials the digit "4"
Dials the digit "5"
Dials the digit "6"
Dials the digit "7"
Dials the digit "8"
Dials the digit "9"
Dials the digit "*"
Dials the digit "#"
Takes the phone offhook