Polycom SoundStructure C16 Design Manual page 228

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
8 - 28
The recorder has the following features as shown below.
Pause
Recording
Start
Recording
Number of
commands
Control
Start Recording
Pause Recording
Stop Recording
Starting Preset
Redo Last Command
Undo Last Command
Last Command Recorded
Number of Commands
Once recorded, the presets are available for review and manual editing in the
Presets page.
Reordering Entries In A Partial Preset
The order of execution of the commands in a partial preset may be adjusted by
changing the order of the lines in the partial preset. To move a line, select the
line and select the up or down arrow as shown in the following figure.
Stop Starting
Recording Preset
Last command
recorded
Description
All UI interaction after starting the
recording will be stored to a partial preset.
Temporarily stops recording commands.
Finishes the partial preset recording.
You can either record a new preset or
append to an existing preset depending
on the value of this field
Redoes a command that was undone with
the Undo button.
Undoes the last command recorded so it
is not part of the preset.
Shows the last command that was
recorded.
Shows the number of commands that
have been recorded with the partial
preset.
Redo last
command
Undo last
command