Polycom SoundStructure C16 Design Manual page 561

Command
set phone_connect
"Phone Out" 1
get phone_connect
"Phone Out" 0
phone_connect
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
Default
Event Source
Description
This parameter sets the connection status of the telephony interface. Setting
the phone_connect status to 1 connects the call, while setting it to 0 disconnects
the call.
Examples
Response
val phone_connect
"Phone Out" 1
val phone_connect
"Phone Out" 0
phone_dial
Argument
Channel Type
Value Type
Read/Write Mode
Phys Chans
Virt Chans
System Limits
Event Source
Connect Or Disconnect Telephony Interface
Argument value
Virtual Channel
Boolean
Read/Write
Analog Telephony Output, VoIP Telephony Output
Mono
0
Yes
Description
Takes the phone output channel "Phone Out" offhook.
Note that the phone out virtual channel name must be
used, not the phone input virtual channel name.
Hangs up the phone line associated with the virtual
channel "Phone Out". Note that the phone out virtual
channel name must be used, not the phone input virtual
channel name.
Argument value
Virtual Channel
String
Write-Only
Analog Telephony Output, VoIP Telephony Output
Mono
Max String Length: 32
No
Command Protocol Reference Guide
Dial The Telephony Interface
A - 45