Push To Talk Microphones With Leds - Polycom SoundStructure C16 Design Manual

Using Events, Logic, And IR
split preset should be called when the switch is open and the combined preset
when the switch is closed, then the triggers or the actions may be easily
reversed on the events. To edit an event, double click the event.

Push To Talk Microphones With LEDs

In this example, the push to talk button on a microphone will be used to mute
all microphones in room and the status LED on the microphone will be illumi-
nated when the microphone is unmuted.
This example assumes that the microphone is already part of the system and
now the logic inputs and outputs will be manually added to the existing sys-
tem. If this is a new system, then use the logic input and logic output modes
on the edit channels control to automatically add the logic inputs and outputs
and events when the microphone inputs are defined.
9 - 25