Soundstructure Voip Interface Api Commands - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

SoundStructure VoIP Interface API Commands

12 - 76
questions. For PBX specific integration questions about line registration
problems to your local PBX, consult your local IT/Phone specialist who
has deployed other VoIP endpoints in that environment.
The existing SoundStructure API commands have been updated to support
the SoundStructure VoIP Interface input and output channels. There are also
new API commands that have been created for the SoundStructure VoIP Inter-
face. For a quick overview of the commands, refer to the table shown next. For
more complete information, see the updated command set in
tocol Reference Guide
SoundStructure device with your PC's browser.
Parameter Name
voip_answer
voip_blind
voip_board_info
voip_bootblock_sw_ver
voip_bootrom_sw_ver
voip_call_appearance
voip_call_appearance_info
voip_call_appearance_line
voip_call_appearance_state
voip_cancel
voip_conference
voip_dhcp_boot_serv
voip_dhcp_boot_serv_opt
in Appendix A or navigate directly to the
Description
Used to answer an incoming call.
Used with voip_transfer to make a blind transfer.
Returns manufacturing and hardware information
about the plug-in card.
Returns the bootblock version of the plug-in card.
Returns the bootROM version of the plug-in card.
Selects the currently active call appearance. Some
parameters operate on the currently active call
appearance. This is similar to pressing a call
appearance on a desktop phone.
Reports textual caller-id information for the
specified call appearance.
Reports the line number associated with the
specified call appearance.
Reports the state of the specified call appearance.
Examples states include 'connected', 'ringback',
'disconnected', and others.
Used to cancel a transfer or a conference.
Used to start a conference call.
Controls the boot server option for the plug-in card.
When voip_dhcp_boot_serv is set to custom, this
parameter specifies the DHCP option number in
which the plug-in card will look for the boot server.
Command Pro-