Polycom SoundStructure C16 Design Manual page 321

To find the IP address of the SoundStructure VoIP Interface, connect to the
online SoundStructure device with SoundStructure Studio and navigate to the
Wiring page. The IP address of the SoundStructure VoIP Interface is found in
the lower right-hand portion of the display as shown in the following figure.
In this example, the IP address of the SoundStructure VoIP Interface is
172.22.3.159.
If the network address is not listed, then the SoundStructure VoIP Interface
did not receive an IP address from a DHCP server and either its network cable
must be installed or its IP address must be configured manually through
SoundStructure Studio.
If you have a valid IP address for the SoundStructure VoIP Interface but can't
browse into the interface with the Web Configuration Utility and can't network ping
the interface, it is possible you have a network route to the interface that only
supports RTP packets. Contact your network administrator to create a network
route from your data network to your VoIP network that will allow you to configure
the SoundStructure VoIP Interface.
Once you have a valid IP address for the SoundStructure VoIP Interface and
have access to that particular network, you may customize the settings using
the Web Configuration Utility.
The Web Configuration Utility has context sensitive Field Help information
that displays on the right side of the web page and provides detailed informa-
tion on the parameter settings.
The SoundStructure VoIP Interface
12 - 23