Customizing Soundstructure Telephony Settings - Polycom SoundStructure C16 Design Manual

Customizing SoundStructure Telephony Settings

Name
Auto Answer
Entry Tone
Exit Tone
Ring Tone
Tone Gain
Do Not Disturb
You can use the telephony settings to customize the behavior of the Sound-
Structure VoIP Interface with the following options.
Possible Values
Enable or
Disable (default)
Enable (default) or
Disable
Enable (default) or
Disable
1 Normal ring
(default)
2 Low trill
3 Low double trill
4 Medium trill
5 Medium double trill
6 High trill
7 High double trill
8 Highest trill
9 Highest double trill
10 Beeble
11 Triplet
12 Ring splash
13 Low trill
precedence
14 Silent
-20 to +20 dB. Default is
0.
Enable or
Disable (default)
The SoundStructure VoIP Interface
Description
Enables or disables answering the phone
automatically after the second ring.
Determines whether the system plays a tone when
the phone is auto answered.
Determines whether the system plays a tone when
the phone auto hangs up after the remote caller
hangs up.
Customizes the default ringtone to one of 14
values. The default ringtone corresponds to the
Default Ringtone in the Web Configuration Utility
under Preferences > Ringtones > Default Ringtone.
You can further customize the ringtone for an
individual line from the Web Configuration Utility
under Settings > Lines > Line 1 > Ring Type. The
default value for the Ring Type is to use the Default
Ringtone setting from Preferences > Ringtones
Sets the level of the entry and exit tones.
Determines whether the entire SoundStructure
VoIP Interface is in Do Not Disturb mode. This
setting will affect all line registrations and is not
adjustable on a per line basis.
12 - 43