Gating Information Sent To A Control System - Polycom SoundStructure C16 Design Manual

Using Events, Logic, And IR
If there are user min and max fader limits set on the "Amplifier" channel, then
those limits will be used automatically with the map event.

Gating Information Sent To A Control System

In this example, a logic output will be used to indicate that a particular micro-
phone has gated on. When the gate status changes, the logic output will
change and the SoundStructure system will send a command acknowledge-
ment that could be used by a control system to indicate that a microphone has
gated on.
Step 1: Add the Logic Output pin
In this example, a single logic output pin called "Mic 1 Gate" is created. Check
the wiring page and the logic connections to a desired logic output pin if
required.
9 - 33