Soundstructure Parameters - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

SoundStructure Parameters

Gain and Mute Parameters
A - 30
Fader Examples
Examples of using the fader commands and their acknowledgements are
shown below:
set fader "Amplifier" 1
val fader "Amplifier" 1.0
set fader "Amplifier" 10
val fader "Amplifier" 10.0
set fader max "Amplifier" 10
val fader max "Amplifier" 10.0
set fader min "Amplifier" -20
val fader min "Amplifier" -20.0
get fader "Amplifier"
val fader "Amplifier" 10.0
set fader "Amplifier" -40
val fader "Amplifier" -20.0
In the last example because the fader min was set to -20, trying to set the fader
to -40 limited the value to -20 automatically.
Description
The fader, gain, and mute parameters are described here. The telephony gains,
faders, and mutes are described in the Telephony Parameters section. The
matrix crosspoint gains and mutes are described in the Matrix Parameters
section.
fader
Argument Argument value
Channel Type Virtual Channel
Value Type Floating-Point
Read/Write Mode Read/Write
Digital Fader