Upgrading The Firmware In The Soundstructure System - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Upgrading the Firmware in the SoundStructure System

12 - 16
The wiring page of the new project will show the SoundStructure VoIP Inter-
face installed as shown in the following figure.
At this point, you have created an offline project that includes the SoundStruc-
ture VoIP Interface. Configuration of the SoundStructure VoIP Interface
settings will be described in
If you have completed your customization, you can now upload the configu-
ration file to a SoundStructure C12 system that has the SoundStructure VoIP
Interface installed and continue with configuring the SoundStructure VoIP
Interface settings once connected online.
If you upload a configuration that requires a SoundStructure VoIP Interface to a
SoundStructure system that does not have a SoundStructure VoIP Interface
installed, the Upgrade Plug-in Card tool will be automatically run to allow you to
modify the project to match the installed hardware.
Before loading a project with a SoundStructure VoIP Interface to a Sound-
Structure system, ensure that you are running SoundStructure device
firmware 1.5.0 or later.
Configuring the SoundStructure VoIP Interface.