Dynamic Ip Addresses - Polycom SoundStructure C16 Design Manual

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Dynamic IP Addresses

10 - 2
By default, the SoundStructure device accepts an IP address from a DHCP
server. Once assigned, IP addresses can be determined with the SoundStruc-
ture Studio software via the SoundStructure device discovery method. To
determine the IP address, connect to the device using the Search for Devices
option as shown in the following figure.
SoundStructure Studio will display a list of systems found on the network
interface specified by the Search Network option. The SoundStructure sys-
tems that are found will be shown with their system name, IP addresses, MAC
addresses, and firmware version as shown in the following figure.