Polycom SoundStructure C16 Design Manual page 192

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
If the actual SoundStructure target devices do not match the devices in the con-
figuration file, SoundStructure Studio will present the option of either
correcting the mismatch or not uploading the configuration file as shown in
the following figure.
Select No to cancel the project upload or select Yes to correct the device mis-
match. Selecting Yes will show the following dialog that shows the discovered
devices and the unused inputs and outputs if this equipment is used for the
configuration file.
7 - 12