Installation Options - Polycom SoundStructure C16 Design Manual

Installation Options

PIN 2: TXD
PIN 3: RXD
PIN 5: GROUND
PIN 7: CTS
PIN 8: RTS
RS-232
LAN OBAM IR
C-LINK2 IN OUT 12V
PIN 2: TXD
PIN 3: RXD
PIN 5: GROUND
PIN 7: CTS
PIN 8: RTS
RS-232
LAN OBAM IR
C-LINK2 IN OUT 12V
There are several installation options available depending on whether tabletop
or ceiling microphones are being used. The following figure shows typical
wiring options using the Polycom SKUs highlighted with the dashed boxes for
tabletop microphones and ceiling microphone arrays. These SKU's include the
cables that are shown within the dashed boxes and are summarized in the
table below
See the Polycom HDX Microphones and SoundStructure Best Practices docu-
ment for more information on using HDX microphones with SoundStructure
devices.
.
SKU
2215-23327-001
2215-23809-001
2215-23809-002
2215-23810-001
2215-23810-002
POLYCOM
HDX Mic 1
POLYCOM
HDX Mic 1
Description
Tabletop microphone array with 25' Walta to Walta cable
Black ceiling microphone array kit
White ceiling microphone array kit
Black ceiling microphone array extension kit
White ceiling microphone array extension kit
Connecting Over Conference Link2
POLYCOM POLYCOM
HDX Mic 2 HDX Mic 3
POLYCOM POLYCOM
HDX Mic 2 HDX Mic 3
6 - 23