Polycom SoundStructure C16 Design Manual page 660

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
set eth_settings 1
"mode='dhcp'"
set eth_settings 1
"mode='static',addr='192.
168.10.63',dns='192.168.
10.1',gw='192.168.10.254
',nm='255.255.255.0'"
get eth_settings 1
Command
get eth_mac 1
A - 144
val eth_settings 1
"mode='dhcp',addr='172.
22.2.129',dns='172.22.1.1
172.22.1.2',gw='172.22.2.
254',nm='255.255.255.0'"
val eth_settings 1
"mode='static',addr='192.
168.10.63',dns='192.168.
10.1',gw='192.168.10.254
',nm='255.255.255.0'"
val eth_settings 1
"mode='static',addr='192.
168.10.63',dns='192.168.
10.1',gw='192.168.10.254
',nm='255.255.255.0'"
eth_mac
Argument
Channel Type
Value Type
Read/Write Mode
System Limits
Event Source
Description
This parameter gets the MAC address for the system's Ethernet port. The value
will be formatted in all lowercase with bytes separated by a colon, for example
"00:04:f2:bf:00:01".
Examples
Response
val eth_mac 1
"00:04:f2:bf:00:01"
Sets the ethernet settings on device 1 to dhcp and
returns the full ethernet settings.
Sets the ethernet settings on device 1 to the static IP
address of 192.168.10.63 and returns the full ethernet
settings. All parameters must be specified even if just
changing one parameter.
Queries the ethernet settings on device 1.
Argument value
Device-Specific System
String
Read-Only
Max String Length: 17
No
Description
Queries the ethernet mac address on device 1.
Get Ethernet MAC Address