Soundstructure Log Information - Polycom SoundStructure C16 Design Manual

SoundStructure Log Information

You can export different settings from the SoundStructure VoIP Interface as
shown next.
Export Configuration File
All Configuration Settings (except
Device Settings)
Config Files
Local
Web
Device Settings
To export a configuration, choose the type of export and click Export. If you
are interested in exporting the line registration information, you will want to
select the Config File option.
You can get the SoundStructure logs from the Wiring page within SoundStruc-
ture Studio.
If the SoundStructure VoIP Interface is detected in a system, the boot section
of the logs will show that a card was detected and in which SoundStructure
system the card was found. An example of this is shown next.
Sept 2 05:25:11 dsploader: sts: Detected plug-in card type:
...
Sept 2 05:25:36 gcp: sts: discovered 1 devices
Sept 2 05:25:36 gcp: sts:
Jul 28 05:25:36 gcp: sts: starting global command processor
The SoundStructure VoIP Interface
Description
Exports the configuration from all sources
except for the device specific settings
including line registration information,
codec preferences, and other information
that has been configured differently from
the default values.
Exports the parameters from the
configuration files which includes line
registration information. This file is useful
if you want to take the line registration
from one system, customize it, and reuse
it in a different system.
Exports parameters that were configured
on the phone's local user interface. This is
not relevant to the SoundStructure VoIP
Interface.
Exports parameters setup in the Web
Configuration Utility including codec
priorities and other changes from the
default configuration exclusive of line
registration information.
Exports the parameters associated with
the device including DHCP options,
provisioning server authentication
settings, and more.
1: c16 [voip ]
VOIP
12 - 73