Processing On The Signals The Polycom Hdx Sends To Soundstructure - Polycom SoundStructure C16 Design Manual

Hide thumbs Also See for SoundStructure C16:

Table of Contents

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12

Processing On The Signals The Polycom HDX Sends To SoundStructure

Video Call In

Each of the signals that the Polycom HDX video system sends to the Sound-

Structure device have processing that can be applied as shown in the following

figure. This processing is configured through the SoundStructure Studio

The HDX Program Audio In and HDX Video Call In channels have dynamics

processing, parametric equalization, an input fader, input delay, and mute

control available for their input processing. In addition there are signal level

meters that can be displayed for these channels.

The HDX PSTN In and HDX UI Audio In channels are routed directly to the

SoundStructure matrix and do not have dedicated SoundStructure input pro-

cessing or signal level metering. If processing or metering is desired on these

signals before the signals are used in the matrix, these signals may be routed

to the SoundStructure submixes where dynamics processing, parametric

equalization, fader, delay mute control, and signal level meters are available.

The outputs from the submixes may then be used as inputs to the matrix. As

with other virtual channels, the submix signals have virtual channel names

and are controlled in the same fashion as any other virtual channel within a

SoundStructure system.

Equalization

Equalization

Show Quick Links

Table of Contents