Polycom SoundStructure C16 Design Manual page 304

Design Guide for the Polycom SoundStructure C16, C12, C8, and SR12
To get the configuration file, select the Connect menu option in SoundStruc-
ture Studio and select the Search for Devices option to find the desired system
from the list of discovered systems. If your system is not discovered, enter the
IP address of the system or choose a system from the address book. Once the
system is identified, select the Get configuration from devices option and
select Connect as shown in the following figure.
Once you have the retrieved the configuration file, disconnect from the online
system by right-clicking on the project name and selecting Disconnect from
the popup menu as shown next.
Starting with an Offline System
Once you have an existing SoundStructure project, use the Upgrade Plug-in
Card Tool to change plug-in cards. The Upgrade Plug-in Card Tool automati-
cally preserves the telephony channel definitions and substitutes the new
interfaces that you have selected, leaving presets and event definitions unaf-
fected by the plug-in card conversion.
12 - 6