Using The Phone Settings Control - Polycom SoundStructure C16 Design Manual

Using the Phone Settings Control

Dialed digits
Phone onhook/offhook
Dial pad
You can use the phone settings control on the Channels Page in SoundStruc-
ture Studio to dial new calls, transfer calls, put calls on hold, join calls and split
calls.
The user interface within SoundStructure Studio has been designed to look
like the user interface of the SoundPoint IP phones with a dial keypad, line
keys, and phone soft keys for initiating and managing calls as shown in the fol-
lowing figure. In addition, there are telephony settings for customizing
auto-answer mode and entry and exit tones and there is a message waiting
indicator that displays when there is a message for any of the line registrations.
A detailed description of the different UI elements is shown in the following
table.
The SoundStructure VoIP Interface
Line keys
Line labels
Phone UI messages
Phone soft keys
Telephony settings
12 - 41