7.1.3.1.3
Default VLAN and Untagged Port Compatibility
When this option is enabled, any traffic being sent on the default VLAN is also sent untagged on this
port.
7.1.3.2
Link
7.1.3.2.1
Speed
Auto: Lets the AP automatically set port speed based on the type of equipment it is connected
to.
10: Forces the port to operate at 10 mbps.
100: Forces the port to operate at 100 mbps.
7.1.3.2.2
Duplex
Auto: Lets the AP automatically set duplex mode based on the type of equipment it is connected
to
Full: Forces the port to operate in full duplex mode.
Half: Forces the port to operate in half duplex mode.
7.1.4
Wireless Port Configuration
See
"Radio Configuration" on page
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
106.
Port Configuration
117