Table of Contents
Advertisement
4.3
Wireless Settings
The SU-A-EZ's wireless settings, ESSID, security, regulatory domain, frequencies
and other radio parameters are described in this section.
Access Point ESSID to Associate – The SSID, or wireless network name, of the
network you want to connect to. All wireless clients and Access Units in the same
network must use the same SSID to associate. The SSID is case sensitive and can
consist of up to 31 alphanumeric characters.
Authentication Algorithm – Sets the SU-A-EZ to communicate with an AU-EZ
configured as an open system, or as a pre-configured system using static shared
keys. (Default: Open System)
Open System: If you don't set up any other security mechanism on the
SU-A-EZ, the network has no protection. This is the default setting.
Shared Key: Sets the SU-A-EZ to use WEP shared keys. If this option is
selected, you must configure at least one key on the SU-A-EZ and AU-EZ.
Data Encryption Option – Enable or disable the SU-A-EZ to use data encryption
(WEP). If this option is selected when using static WEP keys, you must configure
at least one key on the SU-A-EZ and the AU-EZ. (Default: Disabled)
SU-A-EZ Manual
Wireless Settings
45
Advertisement
Table of Contents
