Cli; Configuring Cli Support - Alvarion BreezeACCESS Wi2 System Manual

Chapter 8 - Management
8.4

CLI

The AP provides a command line interface that can be used to perform configuration and
management tasks via the serial port or an IP connection on any of the AP's interfaces.
For complete information using on the CLI, see the AP CLI Reference Guide.
A maximum of three concurrent CLI sessions are supported regardless of the connection type.
8.4.1

Configuring CLI Support

Select Management > CLI to open the Command Line Interface (CLI) configuration page.
Figure 8-6: Command Line Interface (CLI) Configuration
8.4.1.1 Secure Shell Access
Enable this option to allow access to the CLI via an SSH session. The CLI supports SSH on the
standard TCP port (22).
Connectivity and login credentials for SSH connections use the same settings as defined for
management tool administrators on the Management > Management tool page
SSH connections to the CLI can be made on any active interface. Support for each interface
must be explicitly enabled under Security.
The login credentials for SSH connections are the same as those defined under Administrator
authentication.
NOTE
SSH logins always use the local administrator username and password, even if Administrator
authentication is set to use an external RADIUS server.
144
.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual