Table of Contents
Advertisement
Chapter 8 - Management
8.3
SOAP
The AP provides a SOAP interface that can be used by SOAP-compliant client applications to
perform configuration and management tasks.
8.3.1
Configuring the SOAP Server
Select Management > SOAP to open the SOAP server configuration page. By default, the SOAP
server is enabled.
8.3.1.1
Server Settings
8.3.1.1.1
Secure HTTP (SSL/TLS)
Enable this option to configure the SOAP server for SSL/TLS mode. When enabled, the Secure
Sockets Layer (SSL) protocol must be used to access the SOAP interface.
8.3.1.1.2
Using client certificate
When enabled, the use of a X.509 client certificate is mandatory for SOAP clients.
8.3.1.1.3
HTTP authentication
When enabled, access to the SOAP interface is available via HTTP with the specified username and
password.
142
Figure 8-5: SOAP Server Configuration
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
