Guidelines For Positioning Wi² Extender - Alvarion BreezeACCESS Wi2 System Manual

NOTE
Before starting to install the Wi² Extender unit, check that you have all the necessary parts and
accessories. Optional accessories marked with an asterisk (*) can be ordered from your supplier.
3.2.3 Guidelines for Positioning Wi² Extender
CAUTION
ONLY experienced installation professionals who are familiar with local building and safety codes
and, wherever applicable, are licensed by the appropriate government regulatory authorities should
install outdoor units and antennas.
Failure to do so may void the product warranty and may expose the end user or Service Provider to
legal and financial liabilities. Alvarion and its resellers or distributors are not liable for injury, damage
or regulation violations associated with the installation of Outdoor Units or antennas.
The Wi² Extender should be mounted vertically on a 2"- 6" pole. Its location should enable easy
access to the unit and its connectors for installation and maintenance and should have a clear or near
line of sight to the area to be covered.
For best performance, the SU-ODU attached to the unit should have clear or near line of sight to the
base station. For further information about the optimal installation location of the SU-ODU refer to
the relevant manual.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Installation Requirements
41