Alvarion BreezeACCESS Wi2 System Manual page 147

7.5.2.2 DNS Switch on Server Failure
This setting controls how the AP switches between the primary and secondary DNS servers.
When enabled, the AP switches servers if the current server replies with a DNS server failure
message.
When disabled, the AP switches servers if the current does not reply to a DNS request.
7.5.2.3 DNS Switch Over
This setting controls how the AP switches back to the primary DNS server after it has switched to
the secondary DNS server because the primary was unavailable.
When enabled, the AP switches back to the primary server after it becomes available again.
When disabled, the AP switches back to the primary server only if the secondary server
becomes unavailable.
7.5.2.4 Logout Host Name
If a user that is logged in via HTML sends a DNS request for the specified host name, the AP will
log the user out.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
DNS
125