Table of Contents
Advertisement
Chapter 3 - Hardware Installation Wi² Extender
3.1
Wi² Extender ODU Hardware Description
Wi² Extender
Ethernet/P
oE RJ-45 Port
3.1.1
Integrated High-Gain Antenna
The Wi² Extender ODU includes an integrated high-gain (17 dBi) flat-panel antenna for 5 GHz
operation.
3.1.2
Ethernet Port
The Wi² Extender ODU has one 10BASE-T/100BASE-TX RJ-45 port that connects to the power
injector IDU using an Ethernet cable. The Ethernet port connection provides power to the Wi²
Extender as well as a data link to the local network via the IDU.
The unit appears as an Ethernet node and performs a bridging function by moving packets from the
wired LAN to the remote Access Unit (from here on in referred to as AU.)
3.1.3
Ethernet Port Cover (Service Box)
The Wi² Extender's RJ-45 Ethernet port requires the use of a weatherproof cover to seal the unit.
3.1.4
Grounding Point
Even though the Wi² Extender includes its own built-in lightning protection, it is important that the
unit is properly connected to ground. A grounding screw is provided for attaching a ground wire to
the unit.
36
Pole-Mount Bracket
Water-Tight Test Point
Attachment Points (total 4)
(DO NOT REMOVE)
Integrated Antenna
Grounding Point
Screw
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
