Table of Contents
Advertisement
10.3.1.3.3.2 Mesh ID
Unique number that identifies a series of nodes that can connect together to form a local mesh
network.
10.3.1.3.3.3 Minimum SNR
(Alternate master or slave nodes)
This node will only connect with other nodes whose SNR is above this setting (in dB).
10.3.1.3.3.4 SNR Cost Per Hop
(Alternate master or slave nodes)
This value is an estimate of the cost of a hop in terms of SNR. It indicates how much SNR a node is
willing to sacrifice to connect to node one hop closer to the root node, because each hop has an
impact on performance, especially when using a single radio.
10.3.1.3.3.5 Allowed Downtime
The maximum time (in seconds) that a link can remain idle before the link actually gets deleted.
When a slave (or alternate master) looses its link to its master, the discovery phase is re-initiated.
10.3.1.3.3.6 Maximum Links
(Master or alternate master nodes only)
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Figure 10-7: Dynamic: Alternate Master Mode
Local Mesh Profiles
181
Advertisement
Table of Contents
