Table of Contents
Advertisement
Chapter 2 - Hardware Installation
Figure 2-14: Mounting Tilt Accessory on Non-Vertical Pole
To mount the Wi² using the tilt accessory:
1
Mount the tilt accessory bracket on the wall or pole as described above.
2
Using the screws provided attach the pole to the tilt accessory bracket.
3
Using a spirit level, adjust the angle of the pole until it is vertical and tighten the screws to hold
in place.
4
Secure the Wi² to the pole as described in
30
Figure 2-15: Wi² Mounting Using the Tilt Accessory
"Mounting the Wi² Unit" on page
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
28.
Advertisement
Table of Contents
