Alvarion BreezeACCESS Wi2 System Manual page 186

Chapter 9 - Security
9.2.4.1.4 Delete
Select to remove the certificate from the certificate store.
9.2.4.2 Installing a New Private Key/public Key Certificate Chain
Pair
NOTE
RADIUS EAP certificates must have the X.509 extensions. Information about this is available in the
Microsoft knowledgebase at:
http://support.microsoft.com/kb/814394/en-us
The certificate you install must:
Be in PKCS #12 format.
Contain a private key (a password controls access to the private key).
Not have a name that is an IP address. The name should be a domain name containing at least
one dot. If you try to add a certificate with an invalid name, the default certificate is restored.
The name in the certificate is automatically assigned as the domain name of the AP.
1 Specify the name of the certificate file or select Browse to choose one from a list. Certificates
must be in PKCS #7 format.
2
Specify the PKCS #12 password.
3
Select Install to install the certificate.
9.2.4.3 Default Installed Private Key/public Key Certificate Chains
The following private key/public key certificate chains are installed by default:
wireless.alvarion.com: Default certificate used by the management tool and SOAP server.
164
.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual