Table of Contents
Advertisement
Chapter 7 - Network Configuration
7.1.2.2.1
Priority
Sets the priority of the AP within the spanning tree network. Generally, the bridge with lowest
priority is designated as the root bridge of the spanning tree.
7.1.3
Port Configuration
To verify and possibly adjust port configuration, select Network > Ports > Port n. Configuration
options for both ports are the same.
7.1.3.1
VLAN
7.1.3.1.1
VLAN ID
Defines the default VLAN ID for this port. All outgoing traffic that does not have a VLAN already
assigned to it, is sent on this VLAN.
NOTE
Do not assign this same VLAN ID to users dynamically via RADIUS. If you do, traffic for these
users will be blocked.
7.1.3.1.2
Restrict Default VLAN to Management Traffic Only
The default VLAN can be restricted to carry management traffic only. Management traffic includes:
All traffic that is exchanged with the access controller (login authentication requests/replies)
All traffic that is exchanged with external RADIUS servers
HTTPS sessions established by administrators to the management tool
Incoming and outgoing SNMP traffic
DNS requests and replies
116
Figure 7-3: Port 1 Configuration
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
