6.2
Conducting a Site Survey
You can use the wireless neighborhood feature to conduct a site survey to discover the operating
frequencies of other APs in your area.
Select Wireless > Neighborhood and then select Repeat scan every and set the desired interval.
The AP scans at the specified interval to find all active APs. For example:
NOTE
If a AP is not broadcasting its name, the corresponding SSID column is empty.
6.2.1
Scanning Frequency
Scanning frequency depends on how the radio is configured.
Scanning is performed automatically if you defined any of the following on the Wireless > Radio(s)
configuration page:
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Figure 6-5: Wireless Neighborhood
.
Conducting a Site Survey
103