Alvarion BreezeACCESS Wi2 System Manual page 87

5
At the password prompt it is recommended that you change the password. Specify the new
password and select Save. The management tool home page opens.
NOTE
Instructions to select specific elements and menus are specified in the form:
Select Network > Ports. This instructs you to select the Network main menu, and its Ports
sub-menu.
Key elements of the management tool user interface are defined as follows:
To test the wireless network
By default, the AP operates as a DHCP client to obtain its IP address from a DHCP server.
1
Remove the cable and connect the AP with a standard Ethernet cable to the network on which it
will be used. The network must have a DHCP server and an Internet connection. Broadband
routers typically include a DHCP server.
Ruggedized version: Remove the crossover cable, and using a standard Ethernet cable connect
the PoE injector Data In port to the network on which the AP will be used. The network must
have a DHCP server and an Internet connection. Broadband routers typically include a DHCP
server.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Figure 4-4: Main Page
Configuration Procedure
65