Table of Contents
Advertisement
Chapter 7 - Network Configuration
7.1
Port Configuration
The Port configuration page displays summary information about all logical and physical ports and
VLANs. Open this page by selecting Network > Ports.
7.1.1
Port Configuration Information
Status indicator: Operational state of each port, as follows:
Green: Port is properly configured and ready to send and receive data.
Red: Port is not properly configured, disabled, or disconnected.
Jack: Physical interface to which a logical port is assigned.
Name: Identifier for the port. To configure a port, click its name.
IP address: IP addresses assigned to the port. An address of 0.0.0.0 means that no address is
assigned.
Mask: Subnet mask for the IP address.
MAC address: MAC address of the port.
114
Figure 7-1: Port Configuration
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
