Alvarion BreezeACCESS Wi2 System Manual page 177

Message-Authenticator (string): As defined in RFC 2869. Always present even when not
doing an EAP authentication. Length = 16 bytes.
NAS-Identifier (string): The NAS ID set on the Security > RADIUS page for the RADIUS
profile being used.
NAS-Ip-Address (32-bit unsigned integer): The IP address of the port the AP is using to
communicate with the RADIUS server.
NAS-Port (32-bit unsigned integer): A virtual port number starting at 1. Assigned by the AP.
NAS-Port-Type (32-bit unsigned integer): Always set to 19, which represents
WIRELESS_802_11.)
Service-Type (32-bit unsigned integer): Set to LOGIN_USER.
State (string): As defined in RFC 2865.
User-Name (string): The username assigned to the user. Or if MAC-authentication is enabled,
the MAC address of the wireless client station.
The following attributes are mutually exclusive depending on the RADIUS authentication method.
User-Password (string): The password supplied by a user or device when logging in. Encoded
as defined in RFC 2865. Present only when the authentication scheme on the Security >
RADIUS > Profile 1 page is set to PAP/SecurID. Or if MAC-authentication is enabled, the
MAC address of the wireless client station.
EAP-Message (string): As defined in RFC 2869. Only present when the authentication scheme
on the Security > RADIUS > Profile 1 page is set to EAP-MD5.
Alvarion-AVPair (SSID): See the description in the section that follows.
9.1.2.3 Access Accept Attributes
This table lists all attributes supported in Access Accept packets for each authentication type.
Attribute
Class
EAP-Message
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Admin login
802.1X
Using a RADIUS Server
MAC
155