Table of Contents
Advertisement
Chapter 8 - Management
8.5
System Time
Select Management > System time to open the System time page. This page enables you to
configure the time server and time zone information.
1
Set timezone & DST as appropriate.
2
Set Time server protocol, to Simple Network Time Protocol.
3
Select set date & time (time servers) and then select the desired time server. Add other servers
if desired. The AP contacts the first server in the list. If the server does not reply, the AP tries the
next server and so on.
4
Select Save and verify that the date and time is updated accurately. A working Internet
connection on the AP Internet port is required.
NOTE
If you do not yet have an Internet connection on the AP Internet port, you can temporarily set the
time manually with the Set date & time (manually) option. However, It is important to configure a
reliable time server on the AP.
146
Figure 8-7: System Time
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
