Table of Contents
Advertisement
9
Under Protocol, from the drop-down list select TCP.
10
Under Start port, from the drop-down list select http. Start port and End port are
automatically populated with the common HTTP port, 80.
11
Under Priority, from the drop-down list select Low.
Figure 7-13: Adding a New IP QoS Profile- Profile Name: Web
12
Select Save.
7.7.2.2
Assign the Profiles to a Virtual Network
1
Select VSC on the main menu and then select one of the virtual network profiles in the Name
column. Scroll down to the Quality of service section under Virtual AP.
2
Set Priority mechanism to IP QoS.
3
in IP QoS profiles, Ctrl-click each profile you want to add.
4
Select Save.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Figure 7-14: Quality of Service
IP QoS
131
Advertisement
Table of Contents
