Table of Contents
Advertisement
Chapter 7 - Network Configuration
7.7
IP QoS
To ensure that critical applications have access to the required amount of wireless bandwidth, you
can classify packets destined for the wireless interface into priority queues based on a number of
criteria. For example, you can use any of the following to place data packets in one of four priority
queues for transmission onto the wireless interface:
TCP source port
UDP source port
Destination port
Port ranges
You configure IP quality of service (QoS) by creating IP QoS profiles that you can then associate
with virtual networks or use for global wireless settings. You can configure as many as 32 IP QoS
profiles on the AP. You can associate as many as 10 IP QoS profiles with each virtual network.
7.7.1
Configuration
To view and configure IP QoS profiles, select Network > IP QoS. Initially, no profiles are defined.
To create an IP QoS profile select Add New Profile.
128
Figure 7-10: IP QoS Profiles
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
