Table of Contents
Advertisement
Chapter 9 - Security
Attribute
MS-MPPE-Recv-Key
MS-MPPE-Send-Key
Session-TImeout
Termination-Action
Tunnel-Medium-Type
Tunnel-Private-Group-ID
Tunnel-Type
9.1.2.3.1
Descriptions
Class (string): As defined in RFC 2865. Multiple instances are supported.
EAP-Message (string): Note that the content will not be read as the RADIUS Access Accept
overrides whatever indication is contained inside this packet.
MS-MPPE-Recv-Key: As defined by RFC 3078.
MS-MPPE-Send-Key: As defined by RFC 3078.
Session-Timeout (32-bit unsigned integer): Maximum time a session can be active. After this
interval, the 802.1x client is re-authenticated.
Termination-Action: As defined by RFC 2865. If set to 1, customer traffic is not allowed
during the 802.1x re-authentication.
Tunnel-Medium-Type: Used only when assigning a specific VLAN number to a customer. In
this case it must be set to 802.
Tunnel-Private-Group-ID: Used only when assigning a specific VLAN number to a customer.
In this case it must be set to the VLAN ID.
Tunnel-Type: Used only when assigning a specific VLAN number to a customer. In this case it
must be set to VLAN.
9.1.2.3.2
Access Reject
Access Reject RADIUS attributes are not supported.
156
Admin login
802.1X
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
MAC
Advertisement
Table of Contents
