Chapter 2 - Hardware Installation
2.1.2
Top Panel
Figure 2-3
2.1.3
LED Indicators
The Wi² includes eight status LED indicators.
describes the system status.
2.1.3.1
Autonomous Mode
The status lights provide the following information when a AP is operating in autonomous mode:
14
Figure 2-3: Top Panel (without the SU-ODU)
shows the top panel of the Wi² unit with two N-type RF connectors for external antennas.
Figure 2-4: LED Indicators
Figure 2-4
shows the LEDs and the table below
BreezeMAX Wi² and BreezeACCESS Wi² System Manual