Set the AP to its default configuration by pressing the reset button on the back panel for 5
seconds or more. Then use the default user name admin and a null password to access the
management interface.
5
If all other recovery measure fail, and the AP is still not functioning properly, take one of the
following steps:
Reset the AP's hardware using the console interface, web interface, or through a power
reset.
Reset the AP to its default configuration by pressing the reset button on the back panel for 5
seconds or more. Then use the default user name admin and a null password to access the
management interface.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Appendix A -Troubleshooting
217