Mac-Based Authentication; Location-Aware; Wireless Mac Filter - Alvarion BreezeACCESS Wi2 System Manual

Chapter 5 - Working with Virtual Networks
5.3.5

MAC-based Authentication

This option enables wireless users to be authenticated by their MAC addresses. Authentication must
occur via an external device. If Use Alvarion access controller is enabled (under General), this
must be an Alvarion access controller, otherwise a third-party RADIUS server can be used.
Enabled
5.3.6

Location-aware

This feature enables you to control logins to the public access network based on the AP, or group of
APs, to which a user is connected. It is only available when Use Alvarion access controller is
enabled (under General).
For each user login, location-aware sends the PHY Type, SSID, and VLAN to the access controller.
It also includes the specified Group name.
5.3.7

Wireless MAC Filter

This option allows or you to only allow wireless-to-wired LAN traffic for specific wireless-user
MAC addresses. You can either block or allow access.
84
Use Alvarion access controller
Figure 5-16: Location-aware
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Disabled