Table of Contents
Advertisement
4.2
Configuration Procedure
This section walks you through the steps needed to configure the service controller and establish a
connection through the service controller to the Internet.
The service controller is managed via its web-based management tool using at least Microsoft
Internet Explorer 7.0 or Mozilla Firefox 2.0.
NOTE
Do not power on Alvarion Ltd. hardware until directed.
CAUTION
WIRELESS SECURITY: To provide easy wireless access to the management interface, the AP
ships with all wireless security options disabled. Alvarion strongly recommends that once the AP is
installed, you enable a wireless security option to properly safeguard the wireless network from
intruders.
To configure your computer
1
Connect the Ethernet port on your computer to Ethernet port 1 on the AP.
2
Configure your computer to use a static IP address in the range 192.168.1.2 to 192.168.1.254.
The subnet mask of 255.255.255.0 is entered automatically. Set the default gateway to
192.168.1.1, and DNS server to 192.168.1.1
For example, in Windows XP, use Control Panel > Network Connections > Local Area
Connection > Properties > Internet Protocol (TCP/IP) > Properties.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Configuration Procedure
61
Advertisement
Table of Contents
