Table of Contents
Advertisement
3
Configure the profile settings as described in the following
4
Select Save.
9.1.1.2
Configuration Parameters
9.1.1.2.1
Profile name
Specify a name to identify the profile.
9.1.1.2.2
Settings
Authentication port: Specify a port on the RADIUS server to use for authentication. By
default RADIUS servers use port 1812.
Accounting port: Specify a port on the RADIUS server to use for accounting. By default
RADIUS servers use port 1813.
Retry interval: Specify the number of seconds that the RADIUS server waits before access and
accounting requests time out. If the server does not receive a reply within this interval, the AP
switches between the primary and secondary RADIUS servers, if a secondary server is defined.
A reply that is received after the retry interval expires is ignored.
Retry interval applies to access and accounting requests that are generated by the following:
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Figure 9-2: Add/Edit RADIUS Profile
Using a RADIUS Server
Configuration Parameters
section.
151
Advertisement
Table of Contents
