Table of Contents
Advertisement
Chapter 3 - Hardware Installation Wi² Extender
3.3
Mounting the Wi² Extender ODU
The Wi² Extender's pole-mounting bracket has two parts: One rectangular plate with V-shaped
edges that attaches directly to the Wi² Extender ODU, and one steel-band clamp that secures the unit
to a pole. The rectangular plate connects to the unit using four screws. The steel-band clamp threads
through the rectangular plate and around the pole to which it fastens.
Perform the following steps to mount the unit to a 1.5 to 2 inch diameter steel pole or tube using the
mounting bracket:
1
Thread the provided steel-band through the rectangular plate.
42
Thread the steel-band
clamp thourgh the slats
on the rectangular plate
.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
