3.1.5
Water Tight Test Point
CAUTION
Do no remove or loosen this screw. Doing so could lead to damage of the unit.
3.1.6
Pole-Mounting Bracket Attachment Points
The Wi² Extender includes a bracket kit that can be used to mount the unit to a pole, radio mast, or
part of a tower structure.
3.1.7
LED Indicators
The Wi² Extender includes status LED indicators located on the base of the unit, as indicated in the
following figure.
The following table describes the system status LEDs:.
LED
Power
Link
The three pairs of the 11a LEDs display the received signal strength and can be used for aligning
antennas in the wireless link.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
802.11a Wireless
Signal Strength
11a
Figure 3-1: LEDs
Status
Description
On Green
Indicates that the system is working normally.
On Amber
Indicates a system reset.
On Green
Indicates a valid 10/100 Mbps Ethernet cable link.
Flashing Green
Indicates that the
data on a 10/100 Mbps Ethernet LAN. Flashing rate is
proportional to network activity.
Wi² Extender ODU Hardware Description
Power
Power
Link
Ethernet
Link/Activity
is transmitting or receiving
Wi² Extender
37