Table of Contents
Advertisement
Chapter 6 - Wireless Configuration
Since the minimum recommended separation between overlapping channels is 25 MHz (five cells)
the recommended maximum number of overlapping cells you can have in most regions is three. The
following table gives examples relevant to North America, Japan, and Europe.
North America
cell 1 on channel 1
cell 2 on channel 6
cell 3 on channel 11
In North America you can create an installation as shown in the following figure.
Reducing transmission delays by using different operating frequencies in North America.
Alternatively, you can stagger cells to reduce overlap and increase channel separation, as shown in
the following figure.
100
Japan
cell 1 on channel 1
cell 2 on channel 7
cell 3 on channel 14
Figure 6-2: Example of Three Overlapping Cells
Europe
cell 1 on channel 1
cell 2 on channel 7
cell 3 on channel 13
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
Advertisement
Table of Contents
