Scheduled Operations; Managing The Configuration File With Curl - Alvarion BreezeACCESS Wi2 System Manual

Chapter 11 - Maintenance
11.1.2

Scheduled Operations

The Scheduled operations group box enables you to schedule unattended backups or restorations of
the AP's configuration file. See also
Use the following steps to schedule a backup or restoration of the AP's configuration file.
1
Select Maintenance > Config file management. The Config file management page opens.
2
At lower right, select the Scheduled operations checkbox.
3
Under Operation, select Backup or Restore.
4
Under Day of week, select Everyday, or select a specific day of the week on which to perform
the backup or restoration.
5 Under Time of day, specify the hour and minute on which to perform the backup or restoration.
Use the format hh mm, where
hh ranges from 00 to 23
mm ranges from 00 to 59
6 Under URL, specify the path that leads to the local or remote directory in which to save the
configuration file or from which to load the configuration file. For example
ftp://username:password@192.168.132.11/new.cfg
http://192.168.132.11/new.cfg
7
To confirm that the specified URL is correct, select Validate.
8
To commit the schedule that you have configured, select Save.
11.1.3

Managing the Configuration File with cURL.

NOTE
This is an advanced topic. It is recommended that you perform configuration file management as
described in the immediately-previous sections
Scheduled Operations
You can perform configuration-file-related tasks using the free tool cURL (http://curl.haxx.se/),
version 7.1.0 or higher.
The following cURL commands shows you how to manage the configuration file. The following
setup is assumed:
IP address of the port 1 is 24.28.15.22.
206
"Scheduled Update" on page 210.
Manual Configuration File Management
.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
or