Alvarion BreezeACCESS Wi2 System Manual page 151

Figure 7-11: Adding a New IP QoS Profile- Priority: Low
7.7.1.1 Settings
Profile name: Specify a unique name to identify the profile.
Protocol: Specify an IP protocol to use to classify traffic by specifying its Internet Assigned
Numbers Authority (IANA) protocol number. Protocol numbers are pre-defined for a number of
common protocols. If the protocol you require does not appear in the list, select Other and
specify the appropriate number manually. You can find IANA-assigned protocol numbers at
http://www.iana.org.
Start port/ End port: Optionally specify the first and last port numbers in the range of ports to
which this IP QoS profile applies. To specify a single port, specify the same port number for
both Start port and End port. Port numbers are pre-defined for a number of common
protocols. If the protocol you require does not appear in the list, select Other and specify the
appropriate number manually.
NOTE
To accept traffic on all ports for a specified protocol, set Start port to Other and 0.
Priority: Select the priority level that will be assigned to traffic that meets the criteria specified
in this IP QoS profile.
NOTE
It is strongly recommended that you reserve Very high priority for voice applications.
BreezeMAX Wi² and BreezeACCESS Wi² System Manual
.
IP QoS
129