Front Panel Indicators; Connecting To The Instrument; Connecting To The Instrument - Overview; Connecting Over Usb - Keysight N7744A User Manual

1
Getting Started

Front Panel Indicators

Connecting to the Instrument

Connecting to the Instrument - Overview

Connecting over USB

N O T E
30
During operation, you may notice the following LED indicators:
Figure 16 Front Panel Indicators
When you are first connecting the instrument, we recommend you use
the Keysight Connection Expert included with the Keysight I/O
libraries (available on the CD supplied with the instrument, or from
www.keysight.com).
The screenshots show the Keysight N7745A Multiport Power Meter. The same
procedure applies when connecting an Keysight N7744/7/8A Multiport Power
Meter, an Keysight N7751/2A Optical Attenuator and Power Meter, or an
Keysight N7761/2/4/6/8A Optical Attenuator or an Keysight N7711/4A
Tunable Laser System Source or an N773x Optical Switch.
1 If it is not already running, start the Keysight Connection Expert
software.
Keysight N774x Series